31
30
Daily Care and Maintenance
Cleaning the main unit, toilet seat and lid.
Wipe the components with a soft damp cloth.
●
Wet and wring out a soft cloth for wiping the
surface of the components.
1, 2
Cleaning very dirty components.
●
Wet a soft cloth with diluted dish detergent
wipe down the component surfaces.
●
Then wipe off the detergent solution with a
damp cloth.
Cleaning the Remote Controller
●
Any water or detergent should be quickly
removed from the surface of the remote
controller by using a soft cloth or color change
may result.
Cleaning the Floor
●
Using a damp cloth, wipe off urine which has
stained the toilet and the floor.
●
When cleaning, also wipe off detergent and
moisture completely from the floor.
If toilet bowl cleaner gets on the plastic
components.
●
Wipe down the component surface with a wet
cloth and wipe dry.
1
●
Do not use a dry cloth or toilet tissue to wipe plastic components as this may scratch the surfaces.
●
Be careful not to get water on the electrical components. Always wipe up any excess detergent and
water that gets into crevices.
2
Always keep the toilet seat sensor, motion ditection sensor and remote control receiver free from dust and
dirt to ensure optimum operation. (See page 14, 19, 39-45.)
Maintenance
Thorough Cleaning of the Product
Cleaning the main unit, toilet seat and lid.
Remove the lid.
●
Open the lid at a 90
°
angle, grasp with both
hands and lift straight up.
●
Each component can be disassembled for a thorough cleaning.
Approximately
90˚
Remove the toilet seat
●
Open the toilet seat at a 90
°
angle, grasp with
both hands and lift straight up.
✲
The toilet seat cord cannot be removed.
✲
The toilet seat cord can only be extended about
2 inches. Do not pull on the seat cord as it may
damage the cord.
✲
The toilet seat should only be removed at a 90
°
angle. Do not apply force to pull up on the seat
as this may cause it to break.
●
After removing the toilet seat, place it on top of
the toilet bowl for cleaning.
Approximately
90˚
Toilet seat cord
Approximately
2 inches
L
Clean the components
●
Refer to the "Daily Care and Maintenance" instructions on page 30.
Make certain that the toilet seat pins
are facing up. (Both right and left pins.)
●
If the toilet seat pins are not facing up, push the
button on the remote controller.
Facing up
Toilet seat
pin (left)
L