![Toto G400 SN920M Instruction Manual Download Page 54](http://html1.mh-extra.com/html/toto/g400-sn920m/g400-sn920m_instruction-manual_1139458054.webp)
54
Troubleshooting
Please check
fi
rst
Is the
POWER LED lit?
■
Is the breaker on the
distribution board turned
on?
➞
Check whether there is a power outage
or the breaker has turned "OFF".
Is the ENERGY
SAVER LED lit?
■
While the LED is lit, energy saver
(Page 24)
is in operation,
so the toilet seat temperature may be reduced or the warm
water heater and toilet seat heater may be turned off.
Is the remote
control working?
■
Are the remote control
batteries dead?
➞
Replace the batteries. (Page 51)
■
Is the remote control
transmitter or the remote
control receiver blocked?
➞
Remove obstructions, dirt, water
droplets or any other blockages.
Battery cover
Close
Open
The remote
control uses
batteries
to operate.
Remote control
transmitter
Remote control
receiver
First, try the actions described on pages 55 to 60. If the problem
persists, consult the installer, seller or the contact listed on the
back cover of this manual.
In the following case, unplug the plug and then plug it again.
If the same symptom persists, consult with the contact
referred on the back cover of this manual.
All LEDs are
fl
ickering
Flash
* You cannot
fl
ush the toilet until the
fl
ashing stops. Follow "If there
is no water due to a power outage" (Page 50) if you need to
fl
ush.
CAUTION
If a water leak occurs,
close the shutoff valve.
Opening/closing
tool or
flat-head screwdriver.
Lit
Summary of Contents for G400 SN920M
Page 63: ...63 MEMO Reference...