53
4
Remove the water drain plug.
Water comes out from around the wand (about 90 seconds)
Water drain plug
5
Reinstall the water drain plug and cover.
●
Putting antifreeze in the water remaining in the bowl unit will reduce its chance of freezing.
(The antifreeze solution should not be
fl
ushed out. Collect it before using the toilet and dispose of it.)
■
To use the Washlet again
The water needs to be resupplied. (See below)
Resupplying the Water
1
Open the shutoff valve.
Check that water is not leaking from a pipe or the top unit.
Soft cloth soaked in water
(to prevent scratching)
Paper cup
2
If the power is not turned ON
Insert the power plug.
3
Discharge water from the wand.
(1) Pressing down the right side of the toilet seat,
(2) Press [REAR] on the remote control to discharge water from the wand for about two minutes.
(It takes about one minute maximum before water comes out. Catch the water in a paper cup or other receptacle.)
■
If the remaining water has frozen and no water comes out
Heat the inside of the bathroom, and warm the water supply hose and shutoff valve using a cloth soaked
in warm water.
Reference
Summary of Contents for G400 SN920M
Page 63: ...63 MEMO Reference...
