5
ENGLISH
INSTALLATION PROCEDURE - Spout
INSTALLATION PROCEDURE - Controller
Remove
Slip washer
Bottom gasket
Nut
Top gasket
Countertop
Countertop
Nut
Sensor cable
Tube
Bottom gasket
Slip washer
Nut
Bottom gasket
Slip washer
Tube
Sensor cable
1.Remove nut, slip washer and bottom gasket.
1.Select the position of the controller
and layout the mounting template.
2.Mark the location of the mounting
holes.
3.Drill 3 holes.
2.Install the spout on the countertop.
3.Install bottom gasket, slip washer
and nut in that order.
4.Confirm the alignment of spout and
tighten nut.
Make sure the sensor cable and soap
tube can reach the mounting template.
Depth : 1”(25mm)
Important: Mounting template to be level.
Mounting template
Size: 7/64" (3mm) without wall plug
1/4" (7mm) with wall plug
3-1/8”
(80mm)
4-5/8”
(118mm)
1-9/16”
(40mm)
Summary of Contents for DSE101EEB
Page 2: ......
