4
POSITION OF THE DISPENSER AND TANK
Position of the Dispenser
Hole for installing the dispenser
[1” ~ 1-3/16” (25~30mm) in diameter]
Faucet
Sink
Auto Soap Dispenser
Position of the Tank
Controller
9-1/8”(230mm)
minimum
Tank
Cover
3-1/2"(90mm)
1. Be sure to leave at least 4-3/4"
(120mm) of space between
the soap dispenser and the
faucet to prevent accidental
activation.
1. When installing the
controller, make sure
that the tube and cables
can reach the tank.
2. If the tube is too long,
please cut it to suitable length.
3.Be sure there is adequate space
for refilling/replacing soap tank.
2. Leave 3-1/8"(80mm) of space
maximum from the inside edge
of the sink to the spout installation
hole to ensure that any residual
soap drips from the dispenser
spout into the sink bowl.
(1) Space between the dispenser and
the faucet to be 4-3/4”(120mm) minimum
(2) The distance from the soap
dispenser to the edge of the sink
to be 3-1/8”(80mm) maximum
ENGLISH
Tube length: 17-3/4”(450mm)
Sensor cable length: 19-3/4”(500mm)
Power cord length: 59”(1500mm)
Sensor Cable
Tube
6”~12”(150~300mm)
<4”(100mm)
<4”(100mm)
Power cord
Wall Surface
Unit: inches
(mm)
<6”(150mm)
Summary of Contents for DSE101EEB
Page 2: ......
