2
ENGLISH
TABLE OF CONTENTS
THANKS FOR CHOOSING TOTO!
The mission of TOTO is to provide the world with healthy, hygienic and more
comfortable lifestyles. We design every product with the balance of form and
function as a guiding principle. Congratulations on your choice.
Thanks for Choosing TOTO
®
! .................. 2
Common Tools Needed ............................ 2
Before Installation ...................................... 2
Included Parts ............................................ 3
Care and Cleaning ..................................... 3
Installation Procedure ............................... 4
Maintenance Instructions ..................................... 5
CEFIONTECT
®
Cleaning Instructions ................. 6
Servicing Fill Valve ................................................ 7
Warranty ................................................................ 8
Rough-In Dimensions ........................................ 23
COMMON TOOLS NEEDED
• 12” pipe wrench
• 10” adjustable wrench
• Carpenter’s Level
• Tape Measure
• Plier
MATERIALS REQUIRED:
• Flexible Supply Tube / Connector
• Supply Stop Valve
• Screwdriver
• Putty Knife
• Drill
•
11
/
64
” drill bit for wood floor installation
•
5
/
16
” drill bit for concrete/tile installation
• Mounting (T) Bolts & Nuts (2pc)
• Wax Ring / Seal
BEFORE INSTALLATION
Read instruction manual before installation.
Maintenance and warranty information included in manual, DO NOT DISCARD.
Locate water supply and drain pipe.
Verify enough space is available for installation and
unobstructed operation of equipment
(doors opening/closing, etc…). Failure to do this
beforehand may result in incorrect product installation
and possible malfunction.
Thoroughly flush the supply pipes of dirt and debris.
Proceed to install the supply hose to the tank and
make sure you do not damage the end connection of
the hose.
After installation, verify water and electricity are
working properly.
Gaps between the discharge pipe and the floor should
be filled with mold-resistant silicone-based seal
material (Mediseal).
Minimum required water pressure (flowing): 7 PSI at
2.64 Gal/min (0.05 MPa at 10 L/min). Maximum water
pressure (static): 108 PSI (0.75 MPa).
IMPORTANT!
For back-to-back installations, Tornado flushing systems require a WYE fitting
incorporated into the toilet drain system. Please contact your builer/contractor for
additional information prior to installation.
Double Combination WYE / 1/8 Bend
YES
Double Sanitary Tee / Sanitary Cross
NO
