26
Client PIN Number:
please input the PIN code specified in wireless client you wish to
connect, and click
Start PIN
button. The WPS LED on the router will blink fast when WPS is
in progress. It will return to normal condition after two minutes. (You need to setup WPS
within two minutes)
4.6.8 Access Control
By default, Wireless Access Control Mode is disabled.
There are two ways to set the Access Control List:
1. If you select
Allow List
and enter the MAC Address of wireless client, the listed address
will have granted access to the Access Point while the other access will be denied.
2. If you select
Deny List
and enter the MAC Address of wireless client, the listed address
will have denied access to the Access Point while the other access will be granted.
MAC Address:
the wireless MAC address that you allow to access or not.
Comment:
describe the reason why you allow or deny the access of the MAC Address.
You need to click
Apply Changes
to make your setting work.
Current Access Control List:
this list will show all the current access control that you have
set. And you’re able to delete some or all of them using the
Delete Selected
or
Delete All
button.
4.6.9 Schedule
The wireless schedule allows you to setup the time when WiFi is on. It is very convenient
for users who often access the Internet very regularly. You have to enable
NTP in Time
Zone Setting
part before setting schedule.
