4
5
For those familiar with e-cigarettes, the steps below can be followed to allow the
device to be used in the shortest possible time:
• Prime the atomizer head
• Fill the tank
• Switch the Tornado NC on
• Press the power button and inhale
• Charge the battery (it will may not have been shipped with a full charge)
It is important to “prime” a new atomizer head before first use. Failure to do so
can damage the atomizer head.
Grip the airflow adjuster and unscrew the tank from the battery. Holding the
tank by the airflow adjuster, unscrew the top cap and tank glass. Prime the fitted
atomizer by dripping a few drops of e-liquid onto the heating element and the
cotton inside it. Screw the top cap and tank glass back onto the tank base, then
screw the tank back onto the battery.
Note: Leave a new atomizer head to sit in a tank full of e-liquid for five
minutes before vaping. This ensures the atomizer head is fully saturated with
e-liquid before use.
QUICK START GUIDE
PRIMING THE ATOMIZER HEAD
Summary of Contents for TORNADO NC
Page 1: ...USER MANUAL ...
Page 12: ...22 23 ...