12
13
USING YOUR TORNADO NC KIT
USING YOUR TORNADO NC KIT
part of the atomizer head slightly,
and gently push the other end into
place. Before using a new atomizer
head it must be primed, please
see Priming the Atomizer Head and
Filling the tank for more information.
Ensure the wicking material is
evenly disposed along the length
of the metal part of the atomizer
head, and protrudes evenly from
both ends of the slot in the tank
base. Refit the tank base to the top
cap and tank glass, and refit the
assembled tank to the battery.
Reminder: Leave a new atomizer
head to sit in a tank full of
e-liquid for five minutes before
vaping. This ensures the atomizer
head is fully saturated with
e-liquid before use.
Charging the Battery
Insert the supplied USB cable into
the Tornado NC charging port, and
connect the other end to a USB
port or suitable wall adaptor. The
indicator light will illuminate red
while charging. When fully charged,
the indicator light will switch off.
The Tornado NC can be used
normally while charging.
Replacing the Atomizer Head
Unscrew the tank from the battery,
invert the tank, and unscrew the
tank base from the top cap and
tank glass. Remove the fitted
atomizer head by gently pulling
on one end of the atomizer head.
The atomizer head should pull
away easily from the base. Place
one end of the new atomizer head
into the base, compress the metal
Summary of Contents for TORNADO NC
Page 1: ...USER MANUAL ...
Page 12: ...22 23 ...