TOTALINE CPE230RF, Owner'S Manual

Page: 5 / 16

MODE BUTTON — The Mode button selects the operating mode of the
thermostat.
• If OFF is selected, the thermostat will not enter Heating or Cooling mode.
• If HEAT is selected, the thermostat will only enter Heating mode (if the
room temperature is below the heating set point). The thermostat will not
provide cooling.
• If COOL is selected, the thermostat will only enter Cooling mode (if the
room temperature is above the cooling set point). The thermostat will not
provide heating.
• If AUTO is selected, the thermostat will enter Heating or Cooling mode
based on the room temperature and the heating and cooling set points. The
thermostat will provide automatic changeover from Heating to Cooling mode
and Cooling to Heating mode when required. The thermostat will auto-
matically switch to maintain the desired temperature setting. The ther-
mostat does not need to be manually changed from heating to cooling or
cooling to heating operation.
• If PROGRAM ON is selected, your daily schedule is enabled and the ther-
mostat will follow the programmed daily schedule stored in its memory.
NOTE: Only the transmitter with Unit ID Number 1 may have a programmed
schedule.
MODE
OVER
AUTO
Pm
COOL
HEAT
BACKLIT LCD DISPLAY
TRANSMITTER INDICATOR
WARMER OR + BUTTON
COOLER OR - BUTTON
MODE BUTTON
OVERRIDE BUTTON
RIDE
Fig. 2 — Thermostat Front Panel Buttons
5