background image

Page 19

One-Year Warranty - This Product is warranted to be free from defects in material and workmanship.  If it appears within 
one year from the date of original installation, whether or not actual use begins on that date, that the product does not 
meet this warranty, a new or remanufactured part, at the manufacturer’s sole option to replace any defective part, will 
be provided without charge for the part itself provided the defective part is returned to the distributor through a qualified 
servicing dealer. 

THIS WARRANTY DOES NOT INCLUDE LABOR OR OTHER COSTS incurred for diagnosing, repairing, removing, installing, 
shipping, servicing or handling of either defective parts or replacement parts.  Such costs may be covered by a 
separate warranty provided by the installer.  

THIS WARRANTY APPLIES ONLY TO PRODUCTS IN THEIR ORIGINAL INSTALLATION LOCATION AND BECOMES VOID UPON 
REINSTALLATION.

LIMITATIONS OF WARRANTIES – ALL IMPLIED WARRANTIES (INCLUDING IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR 
PURPOSE AND MERCHANTABILITY) ARE HEREBY LIMITED IN DURATION TO THE PERIOD FOR WHICH THE LIMITED WARRANTY IS 
GIVEN.  SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE MAY NOT 
APPLY TO YOU.  THE EXPRESSED WARRANTIES MADE IN THIS WARRANTY ARE EXCLUSIVE AND MAY NOT BE ALTERED, ENLARGED, 
OR CHANGED BY ANY DISTRIBUTOR, DEALER, OR OTHER PERSON WHATSOEVER.

ALL WORK UNDER THE TERMS OF THIS WARRANTY SHALL BE PERFORMED DURING NORMAL WORKING HOURS.  ALL 
REPLACEMENT PARTS, WHETHER NEW OR REMANUFACTURED, ASSUME AS THEIR WARRANTY PERIOD ONLY THE REMAINING TIME 
PERIOD OF THIS WARRANTY.

THE MANUFACTURER WILL NOT BE RESPONSIBLE FOR:
1.  Normal maintenance as outlined in the installation and servicing instructions or owner’s manual, including filter 
     cleaning and/or replacement and lubrication.
2.  Damage or repairs required as a consequence of faulty installation, misapplication, abuse, improper servicing, 
     unauthorized alteration or improper operation.
3.  Failure to start due to voltage conditions, blown fuses, open circuit breakers or other damages due to the 
     inadequacy or interruption of electrical service.
4.  Damage as a result of floods, winds, fires, lightning, accidents, corrosive environments or other conditions beyond 
     the control of the Manufacturer.
5.  Parts not supplied or designated by the Manufacturer, or damages resulting from their use. 
6.  Manufacturer products installed outside the continental U.S.A., Alaska, Hawaii, and Canada.
7.  Electricity or fuel costs or increases in electricity or fuel costs for any reason whatsoever including additional or 
     unusual use of supplemental electric heat.
8.  ANY SPECIAL INDIRECT OR CONSEQUENTIAL PROPERTY OR COMMERCIAL DAMAGE OF ANY NATURE WHATSOEVER.  
     Some states do not allow the exclusion of incidental or consequential damages, so the above may not apply to you. 

This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. 

P/N 88-488  Rev. 4

Warranty

Summary of Contents for Comfort Call P374-0433





















Reviews: