At the thermostat, select the mode (Auto,
Heat Cool, or Off).
Adjust the setpoints to the desired settings.
Here, at the base station, press the
corresponding button for 10
seconds. The LED will flash for
5 minutes
Within 5 minutes of pressing
the button on the base station,
press the link button on the receiver for 3 seconds. The LED on
the receiver will flash twice.
The base station will now remember your settings. You may
change these settings at anytime by repeating the above
steps.
Refer to owner’s manual for more details
1
1 4
4 77
RINGS
11
22
33
44
Energy
Comfort
9vAC Power
LINE
Page 12
If it becomes necessary to reset the link database for any reason (such as
relocating the Comfort Call Base Station to a new location with different
thermostats) follow these steps to clear its memory of linked thermostats:
Installation & Setup
Note: All linked information is stored in the Base Station, so only the
Base Station needs to be reset.
Press and hold both the Comfort & Energy settings buttons.
Apply power while continuing to hold the buttons.
After the reset is complete (about three seconds) the power LED will flash once.
Release the buttons.
Remove power from the Base Station.
,
,
ANSWER MACH.,
FAX, OR PHONE
