__________________________________________________________________________________________________________________________________________________
Page 5/13
2. DESCRIPTION OF THE CHARGER
TOTALIFT TsMVC battery chargers have been designed to charge Lead-Acid batteries.
These units are based on a ferroresonant power transformer, with constant current output.
Two models are available:
TOTALIFT TsMVC 25:
Output current 25 A
AC input 105/120 Vac – 15 A
TOTALIFT TsMVC 50:
Output current 50 A
AC input 230/250 Vac – 15 A
The operation of the TOTALIFT TsMVC chargers is managed by a digital, programmable
control board of the latest generation, which includes flat membrane keyboard and LCD
display.
3. INSTALLATION OF THE CHARGER
Conditions of use:
Operating temperature:
5°C to 45°C
Storage temperature:
-20°C to 60°C
Relative humidity:
less than 75%
CAUTION!
Risk of electrical shock!
The charger can be installed by qualified personnel only.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
Don't use the unit in presence of flammable gas, because it can generate sparks.
ATTENTION!
Make sure that the unit's maximum input power (reported on the data label) is available from
your power supply, and verify that the unit's operating voltage is correct.
Allow adequate air circulation to prevent internal heat buildup.
Don't place the unit near heat sources such as radiators or air ducts, or in a place subject to
direct sunlight, excessive dust, mechanical vibration or shock.
