Total TS730301, Manual

Page: 3 / 18

b. Do not use the power tool if its power switch does not work. Any power
tool that cannot be controlled with the switch is dangerous and must be
repaired.
c. Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing the tool to avoid accidental
starting of the tool.
d. Use the power tool, accessories and bits etc. in accordance with these
instructions, taking into account the working conditions and the work to
be carried out. Using the power tool for operations other than those
intended could result in a hazardous situation.
e. Store power tools out of the reach of children and do not allow people
unfamiliar with the tool to use it.
f. Keep power tools. Check for misalignment or binding of moving parts,
breakage of parts, and any other conditions that may affect the operation
of power tools. If it is damaged, have the power tool repaired before using
it. Many accidents are caused by poorly maintained power tools.
g. Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
5) Service
a. Have your power tool serviced by a qualified person and use replacement
parts recommended by the manufacturer. This will ensure that the safety
of the power tool is maintained.
Additional security warnings
To use this equipment correctly, you must observe the safety regulations, assembly and
operation instructions in this manual.
All those people who use and repair the machine must be familiar with the manual and
informed of occupational hazards. Children and untrained persons may not use the
machine. In addition, these people must be outside the work area.
It is essential to observe the accident prevention regulations and apply them in the area
where the equipment is to be used. The same applies to occupational health and safety
regulations and rules.
Caution
Whenever you use a power tool, follow safety precautions to reduce the risk of fire,
electric shock, and injury to persons. It is also necessary to take into account the advice
contained in the safety instructions section.
The machine must be used under all prescribed start-up and safety instructions, but
bearing in mind that it is not possible to eliminate all risk factors. The following risks may
arise during the assembly and use of the machine:
• Contact with the cutting blade or fracture thereof.
•
Hearing damage or the like if you do not use adequate protection.
• Harmful emissions of sawdust when the equipment is used inside closed areas
without ventilation. Always use dust extractors and dust extraction.
• Always unplug the power cord before making any adjustments or maintenance
to the equipment, including changing the blade.
Safety is a combination of common sense, staying alert, and knowing how your band
saw works.