Total TP425381, Manual

Page: 2 / 23

SAFETY RULES & PRECAUTIONS
Proper safety precautions must be observed. Like all power
equipment this unit must be handled carefully. DO NOT EXPOSE
YOURSELF OR OTHERS TO DANGER. Follow these general rules. Do
not permit others to use this machine unless they are thoroughly
responsible and have read, and understand the machine manual and
are trained in its operation.
ł
Always wear safety goggles for eye protection. Dress properly; do
not wear loose clothing or jewelry that could become caught in
moving parts of the unit. Safe, sturdy, nonskid footwear should
always be worn. Long hair should be tied back. It is recommended
that legs and feet be covered to protect from flying debris during
operation.
ł
Inspect the entire machine for loose parts (nuts, bolts, screws, etc.)
and any damage. Repair or replace as necessary before using the
machine. DO NOT USE any attachment with this power head other
than the ones recommended by our company. Serious injury to the
operator or bystanders could result as well as damage to the machine.
ł
Keep the handles free from oil and fuel.
ł
Always use proper handles and shoulder strap when cutting.
ł
Do not smoke while mixing fuel or filling tank.
ł
Do not mix fuel in an enclosed room or near open flames. Assure
adequate ventilation.
ł
Always mix and store the fuel in a properly marked container that is
approved by local codes and ordinances for such usage.
ł
Never remove the fuel tank cap while the engine is running.
ł
Never start or run the engine inside a closed room or building.
Fumes from the exhaust contain dangerous carbon monoxide.
ł
Never attempt to make engine adjustments while the unit is running
and strapped to the operator. Always make engine adjustments with
the unit resting on a flat, clear surface.
ł
Do not use the unit if it is damaged or poorly adjusted. Never
remove the machine’s guard. Serious injury to the operator or
bystanders could result as well as damage to the machine.
ł
Inspect the area to be cut and remove all debris that could become
entangled in the nylon cutting head. Also remove any objects that the
unit may throw during cutting.
ł
Keep children away. Onlookers should be kept at a safe distance
from the work area, at least 15 METER (50 FEET)
ł
Never leave the machine unattended.
ł
Do not use this unit for any job other than those for which it is
intended as described in this manual.