Total TP425381, Manual

Page: 13 / 23

two months. Fuel mixture stored longer than this will cause hard
starting and poor performance. If fuel mix has been stored longer
than this time. It should be removed and filled with fresh mixture.
2. Never fill the fuel tank to the very top.
3. Never add fuel to the tank in a closed non-ventilated area.
4. Do not add fuel to this unit close to an open fire or sparks.
5. Be sure to wipe off spilled fuel before attempting to start engine
6. Do not attempt to refuel a hot engine
CHECK POINTS BEFORE OPERATION
1. Check for loose bolts. Nuts and fittings.
2. Check the air cleaner for dirt. Clean the air filter of all dirt. Etc.
before operation.
3. Check to be sure that protector is securely in place.
4. Check to be sure that is not leak.
WARNING DANGER
The engine exhaust from this product contains chemicals known to
cause cancer, birth defects, or other reproductive harm.
OPERATIONS
ENGINE STARTING AND
STOPPING PROCEDURES
STARTING COLD ENGINE
Move the stop switch to “START”
position.
1. Give a gentle push on the primer pump
repeatedly (7-10times) until fuel comes
into the primer pump.
2. Cold Starts: Pull lever up to close choke.
3. Pull starter handle until engine flash fires.