Total TIRLI2002, Manual

Page: 9 / 17

9
Drive button
1. Switch / trigger
To start the tool, simply pull the switch trigger. Tool speed is increased by increasing
pressure on the switch trigger. Release the switch trigger to stop.
Note: The tool stops automatically if the switch trigger continues to be pressed for approx. 6
minutes.
Attention
Before inserting the battery cartridge into the tool, always check that the switch trigger
actuates properly and returns to the "OFF" position when released.
Electric brake
This tool is equipped with an electric brake. If the tool does not stop quickly after releasing
the switch trigger, have the tool repaired by an authorized Total dealer.
Front light
1. light
•
Pull the switch trigger to turn on the light.
o
This light stays on while the switch trigger is pulled.
o Shuts off 10-15 seconds after trigger is released.
Note: Please use a dry cloth to clean the dirt on the lens of the light. Be careful not to
scratch it, as it may decrease lighting
.
Attention
Do not look at the light directly.