Total TIRLI2002, Manual

Page: 7 / 17

7
Note: Use only manufacturer-approved batteries. The use of non-original batteries or altered
batteries may cause battery explosion or serious personal injury.
Tips for maintaining maximum battery life
1. Charge the battery cartridge before it is fully discharged. Always stop tool
operation and charge the battery cartridge when you notice less power from the
tool.
2. Never recharge a fully charged battery. Overcharging shortens battery life.
3. Charge the battery cartridge at room temperature 10°C to 40°C (50°F to 104°F).
Let a hot battery cartridge cool down before charging it.
4. Charge the battery cartridge if you do not use it for a long time (approx. more
than six months).
Product description
Attention
Always make sure the tool is turned off and the battery cartridge is removed before
adjusting or checking the function on the tool.
Installing or removing the battery cartridge
Attention
Always turn off the tool before installing or removing the battery cartridge.
Hold the tool and battery cartridge firmly when installing or removing the battery
cartridge. Failure to hold the tool and battery cartridge may cause them to fly out of your
hands and result in damage to the tool, battery cartridge, or personal injury.
1. button battery two.battery cartridge
•
To remove the battery cartridge, slide it out of the tool while sliding the button on
the front of the cartridge.
•
To install the battery cartridge, align the tab on the battery cartridge with the slot
in the casing and slide it into place. Insert it all the way until it clicks into place
with a small click. If you can see the red indicator at the top of the button, it's not
completely locked.