Total TG111165, Manual

Page: 7 / 11

7
•
Insert the drill/tool and firmly tighten the chuck by turning the key clockwise.
•
Remove the wrench and replace it in the storage tab at the base of the drill
handle.
ON/OFF switch operation
•
Press the on/off switch to use the tool.
• Release the switch to stop it.
•
If you want to use the drill continuously, you can press the switch lock button after
pressing the on/off switch.
•
To release the lock button, just press the on/off switch fully, the button will release
automatically.
Variable speed control dial
• The maximum speed can be changed by turning the variable speed control.
•
Turn clockwise to increase and counterclockwise to decrease speed.
• The speed of the drill varies with the amount of pressure applied to the on/off
switch, ie more pressure for more speed.
Turn the chuck key
clockwise to tighten