6
Operating modes
Before initial operation check whether the rated frequency of the power supply
corresponds to the details of the type place. Before using the tool, please read the
instruction book carefully.
start
Make sure the data listed on the nameplate matches the mains voltage before
connecting the unit.
On / off switch
•
On: press the switch (1)
•
Continuous operation: Press the lock knob on the switch (1) (2) to lock it in place
•
Off: Briefly press the switch (1)
Speed control
•
Use the speed control (3) to select the speed.
•
Shift between first - second gear (4)
o
The switch position allows you to work at high or low speeds.
o
The position of the shift switch should only be changed when the unit is
stopped, to avoid damage to the gear.
o
I: First gear
o
II: Second gear
Using the mixer
•
The unit should be run at low speed before submerging or removing it from the
mix.
