5
Product description
The machine has been designed to mix liquid and powder building materials such as
paint, mortar, adhesive, plaster and similar substances. The relevant mixing action
(which depends on the consistency of the materials and the amount to be mixed) must
be set for the appropriate mixing tool.
Please note that our unit is not designed for commercial, industrial, or professional use.
The warranty does not cover whether the unit was used in commercial, industrial or
professional sectors or comparable activities.
Warning
You must adhere to certain safety precautions when using the equipment to prevent
injury and damage from occurring. Therefore, you should always read this operation
manual carefully.
This manual should be kept in a safe place so that the information it contains is always
available. This operating manual must accompany the equipment if it is transferred to
another person.
We do not accept any responsibility for accidents or damages resulting from ignoring this
manual and the safety instructions.
Set up
Mixer Usage Precautions
Attention
You must adhere to the following basic safety measures against electric shock, injury,
and fire hazard when using power tools. Read and follow these instructions before using
any tool. These instructions should be kept in a safe place.
•
The equipment must never be used in environments where an explosive
atmosphere exists. Never mix solvents or substances containing solvents that
have flash points below 21 ° C
•
Do not let the cord touch any part of your body.
•
Use only the extension cord approved for use in the work area.
•
The unit should only start and stop when it is inside a mixing container. Make
sure the mixing container is placed on a solid and secure base.
•
Never put your hands or any other object into the mixing container during the
mixing process.
•
We recommend that you always wear industrial safety gloves, a dust mask and
safety glasses when working with the tool. Also, wear appropriate clothing for this
type of work.
•
Always allow the reaction pair.
Assembling the mixer
•
First screw the mixer part (6a) together with the mixer part (6b).
•
Then screw the mixer 86) onto the mixer holder (5). Use the two keys to do this.
•
Use one of the wrenches (a) to hold the mixer stand (5) in place and then use the
second wrench (b) to tighten the mixer (6).
•
Proceed in the reverse sequence to disassemble the mixer.
