Tosot TW09HQ3D6DI, Owner'S Manual

Page: 19 / 44

up, the temperature will decrease 1
℃
in every hour, after 1
℃
decreased, this
(2) Under the initial presetting temperature17
℃
-20
℃
, after Sleep function started
up, the temperature will decrease 1
℃
in every hour, after 2
℃
decreased, this
temperature will be maintained.
14
temperature will be maintained.
(3) Under the initial presetting temperature 21
℃
-27
℃
, after Sleep function started
Introduction for buttons on remote controller
Note: In the above presetting or enquiry procedure, if continuously within10s, there
Sleep3 - the sleep curve setting under Sleep mode by DIY could be inquired:
The user could accord to sleep curve setting method to inquire the presetting sleep
curve, enter into user individuation sleep setting status, but do not change the tem-
perature, press "Turbo" button directly for confirmation.
is no button pressed, the sleep curve setting status will be automatically quit
and resume to display the original displaying. In the presetting or enquiry pr-
ocedure, press "ON/OFF" button, "Mode" button, "Timer" button or "Sleep"
button, the sleep curve setting or enquiry status will quit similarly.
up, the temperature will decrease 1
℃
in every hour, after 3
℃
decreased, this
temperature will be maintained.
(4) Under the initial presetting temperature 28
℃
-30
℃
, after Sleep function started
(2) Adjust "+" and "-" button, could change the corresponding setting temperature,
Sleep 3 - the sleep curve setting under Sleep mode by DIY:
(1) Under Sleep 3 mode, press "Turbo" button for a long time, remote controller en-
ters into user individuation sleep setting status, at this time, the time of remote
controller will display "1hour", the setting temperature "88" will display the corr-
esponding temperature of last setting sleep curve and blink (The first entering
will display according to the initial curve setting value of original factory);
remote controller, (that are "2hours" or "3hours" or "8hours"), the place of se-
tting temperature "88" will display the corresponding temperature of last setting
sleep curve and blink;
after adjusted, press "Turbo" button for confirmation;
(3) At this time, 1hour will be automatically increased at the timer position on the
(4) Repeat the above step (2)~(3) operation, until 8hours temperature setting finished,
sleep curve setting finished, at this time, the remote controller will resume the
original timer display; temperature display will resume to original setting tem-
perature.