Tosot TW09HQ3D6DI, Owner'S Manual

Page: 37 / 44

3 2
4. Put wiring cover back and then tighten the screw.
5. Close the panel.
Installation of indoor unit
Note:
● All wires of indoor unit and outdoor unit should be connected by a professional.
for a new one. Avoid extending the wire by yourself.
installation.
● For the air conditioner without plug, an air switch must be installed in the line.
The air switch should be all-pole parting and the contact parting distance should
be more than 3mm.
3. Remove the wire clip; connect the power
connection wire to the wiring terminal
according to the color; tighten the screw
with wire clip.
2. Make the power connection wire go
through the cable-cross hole at the back
of indoor unit and then pull it out from
the front side.
Outdoor unit connection
3 2 N(1)
green
green)
red black
(yellow-
(brown)
white
(blue)
Note: the wiring board is for reference only,please refer to th e actual one.
power connection
wire
cable-cross
hole