Tosot TW09HQ3D6D, Service Manual

Page: 17 / 77

14
Technical Information
Service Manual
button, every 200ms to send I FEEL once, after this function started,the remote control will send temperature to the main un it in every 10
minutes.When repress this button, this function will be turned off.
depends on the other received signal within 3s.
10.TEMP button
2.5 seconds, ten numbers change in the one place of minute, then the one place
at 2.5 seconds speed
is constant, ten numbers change in the tens place of minute
and carry. During 5s blink, press the Timer button, the timer setting succeeds. The
the timer button, the Timer On will be canceled.
Timer On has been set up, repress
Before sett ing the Timer, please adjust the Clock to the current actual time.
One press this key to enter into TIMER OFF setup, in which case the TIMER OFF icon will blink. The method of setting is the sameas for
TIMER ON.
Press this button, you can see indoor set temperature, indoor ambient temperature
The setting on remote co-
or outdoor ambient temperature on indoor unit’s display.
ntroller is selected circularly as below:
When selecting " " with remote controller or no display, temperature indicator on
" " with remote controller,
indoor unit displays set temperature; When selecting
temperature indicator on indoor unit displays indoor ambient temperature; When
selecting with remote controller, temperature indicator on indoor unit displays
selecting " " with remote
outdoor ambient temperature. 3s later it will return to the setting temprature or it
outdoor ambient temperature. 3s later it will
no display
Press this button to achieve the on and off of healthy and scavenging functions in operation status. Press this button for the first time to start
scavenging function; LCD displays " " . Press the button for the second time to start healthy and sc-
LCD displays " " and " ". Press this button
avenging functions simultaneously;
for the third time to quit healthy and scavenging functions simultaneously. Press the
button for the fourth time to start healthy function; LCD display " " . Press this bu-tton again to repeat the operation above.
NOTE: This function is applicable to partial of models.
Attention: When displaying the outdoor ambient, the displaying range is 0-60
Ƈ
When it goes beyond the range, it keeps the threshold data (the smallest—0
Ƈ
and the largest 60
Ƈ
).
Warm tips: When operating buttons on the cover please make sure the cover is closed completely.
button
11. /
Press this button once, to turn on the I FEEL function, then the figure of "I FEEL" will be displayed, after every press of other function button,
every 200ms to send I FEEL once, after this function started, the remote controller will send temperature
When repress this button
to the main un it in every 10 minutes.
, this function will be turned off. When I FEEL function is turned on, the remote controller should be put
area where indoor unit can receive the signal sent by the remote controller.
within the
12.I FEEL button
Note: Outdoor temperature display is not available for some models. At that time,
indoor set temperature.
indoor
unit receives " " signal, while it displays
● This function is only available for some models.
Press "
WiFi
" button to turn on or turn off WiFi function. When WiFi function is
controller; Under status
turned on, the " WiFi " icon will be displayed on remote
of remote controller off, press "MODE" and "
WiFi
" buttons simultaneously for 1s,
restore to factory default setting.
WiFi module will
13.LIGHT button
Press this button at unit On or Off status, Light On and Light Off can be set up.
After powered on, Light On is defaulted.
14.WiFi button
15.QUIET button
Press this button, the Quiet status is under the Auto Quiet mode (display " "
singal) and Quiet OFF (there
and "Auto" signal) and Quiet mode (display " "
is no signal of " " displayed), after powered on, the Quiet OFF is defaulted.
16.SLEEP button
Press this button, can select Sleep 1 ( ), Sleep 2 ( ), Sleep 3 ( ) and
electrified, Sleep Cancel is de-
cancel the Sleep, circulate between these, after
faulted.
Under the Quiet mode (Display " " signal).
Sleep 1 is Sleep mode 1, in Cool modes: sleep status after run for one hour, the main unit setting temperature will increase 1
Ƈ
2 hours, setting temperature increased 2
Ƈ
, the unit will run at this setting temperature; In Heat mode:sleep
one hour, the setting temperature will decrease 1
status after run for
Ƈ
, 2 hours, setting temperature will decrease 2
Ƈ
, then the unit will run at
this setting temperature.
The Quiet function is only available for some models.