Tosot 5,000 BTU-GPC05AK-A3NNA1C User Manual Download Page 4

Safety and Instructions

01

Installation and Setup

Please read all instructions before use and save this user manual for future
reference. A digital version can be obtained from Customer Support. 
Your safety and the safety of others are very important to us. We have provided
many important safety messages throughout this manual and on the appliance
itself. Always read and follow all posted safety messages. 
To reduce the risk of fire, electric shock, injury, or death to persons using or near
this appliance, please follow some basic safety precautions. These precautions
include, but are not limited to, the following:

● This appliance is not intended for use by any persons (including children) with

   reduced or restricted physical, mental, or sensory capabilities, or lack of
   experience and knowledge, unless under the direct supervision of a person
   responsible for their safety.

● Please keep plastic bags and sheets out of the reach of children as they might

   be mistakenly used for play. Packaging materials can become airtight chambers
   and may pose a risk of suffocation if not disposed of properly.

● When installing or moving the appliance, be careful not to pinch, crush, or

   damage the power cord.

● Never attempt to operate this appliance if it visibly damaged, malfunctioning,

   disassembled or has missing or broken parts. This includes exposed wiring on
   a damaged cord or electrical plugin. All repairs and servicing must be performed
   by qualified service personnel. Use only authorized TOSOT factory OEM parts.

● Keep the product away from fire. Do not store or use flammable gases or

   materials near the appliance.

● Do not use heating equipment near the appliance.
● In the event of a gas leak (propane gas, LP gas, etc.) do not operate this or any

   other appliance. Open a window or door to ventilate the area immediately.

Summary of Contents for 5,000 BTU-GPC05AK-A3NNA1C































Reviews: