manualshive.com logo in svg

Tosot 5,000 BTU-GPC05AK-A3NNA1C, User Manual, Page: 12 / 30

Share
Download
Tosot 5,000 BTU-GPC05AK-A3NNA1C User Manual Download Page 12

09

       ON/OFF Button

Press to power the air conditioner 

ON

 or 

OFF

.

       Mode Button

Press this button to cycle through the following modes. A corresponding logo
indicator on the left side of the remote will be shown.
a. Cool mode: standard cooling mode. The set temperature and fan speed can
    both be adjusted.

b. Dry mode: the unit will run on low speed for dehumidification. The fan speed

    cannot be adjusted.
c. Fan Only mode: the air conditioner will not produce cool air, only blow air from
    the outside. The fan speed can be adjusted.

       +/- Button

● Pressing the “+” or “-” button will increase/decrease the set temperature by 1°F.

   Holding the button for 2 seconds will cause the temperature to change rapidly.
   Release the button once your desired temperature is reached.

● After pressing the Timer button, each press of the +/- button will increase/

   decrease the time by 0.5 hours. Holding the button for 2 seconds will cause the
   timer to change rapidly. Release the button once your desired time setting has
   been reached.

       Fan Button

Press this button to cycle through the Auto mode and 3 fan speeds (Low, 

Medium,

High)

1

2

3

4

5

Auto

Speed 1

Speed 2

Speed 3

       X-Fan Button

Press this button to toggle the X-Fan mode on when the unit is in operation. When
you turn the machine off you will find the fan is running at a low speed. Press the
X-Fan button again to cancel. The X-Fan mode helps dry residual water inside the
exhaust hose.

Summary of Contents for 5,000 BTU-GPC05AK-A3NNA1C































Reviews:

No comments