manualshive.com logo in svg

Tosot 5,000 BTU-GPC05AK-A3NNA1C, User Manual, Page: 25 / 30

Share
Download
Tosot 5,000 BTU-GPC05AK-A3NNA1C User Manual Download Page 25

22

Cleaning and Maintenance

To avoid electric shock, turn off the air conditioner and disconnect from power

before cleaning. Do not wash or douse the air conditioner with water. Never use

abrasive or flammable solvents to clean the  air conditioner.

Cleaning the outer case

Wipe with a soft cloth soaked in warm water and a mild detergent, if needed.

Cleaning the exhaust hose

Remove the exhaust hose from the air conditioner and clean with a soft cloth

soaked in warm water. Let dry completely before reinstalling.

Cleaning the filter

1. Remove the filter

    Locate the filter and remove it from the air conditioner. You may need to move

    the filter around to loosen.
2. Clean the filter
    After removing, use the dust attachment of your vacuum to suck up any dirt or
    warm water mixed with a mild detergent. A soft bristle brush may help remove
    some of the dirt, if needed. 

3. Reinstall the filter
    After the filter has dried completely, reinstall back into the air  conditioner.

Notes: 

● Clean the filter at least every three months.

            ● Do not touch the metal fins in the air conditioner after removing the filter

               as they may cause personal injury.

            ● Do not attempt to dry the filter with a hairdryer or other heating elements

               as this may deform or ignite the filter.

            ● Do not operate the air conditioner if the air filter is missing.

Summary of Contents for 5,000 BTU-GPC05AK-A3NNA1C































Reviews:

No comments