2.2
Start Autopilot & Back to Home
1) set a HOME point, which is generally the point where you start the autopilot
2) load an prestored target point to start the autopilot
3) back to Home
After the boat arrived the target, autopilot will be finished automaticly. Then
you could choose guiding the boat back to HOME point.
1) Push the
[Down]
key, then appears an
message-box to confirm if you would like to set
the current location as HOME point.
2) Select
[Yes]
to confirm.
Like the operation in step 2, please chose
Home
as the target and start the autopilot. The boat will
run back to the HOME accordingly.
1) Push the
[Autopilot]
key, the cursor would
blink and point to the target.
2) Move the
[Up ]
/
[Down]
key to select an
Quick Reach Target then push
[Autopilot]
or
[
Enter]
key to confirm the selction. An
message-box appears to remind if you will start
the autopilot.
3) Select
[Yes]
to start the autopilot.
NOTE:
during the autopilot, push & pull the joystick of your remote to MAX / MIN
position could stop the autopilot mode.
0427-161201
0615-161004
0930-160842
XXXX - XXXX
XXXX - XXXX
Home
H
2
3
4
5
Home
SET AS HOME?
Yes
No
Messages
Messages
Start Autopilot?
Yes
No
From: 0° 0.0000′ / 0° 0.0000′
To: 32° 15.7354′ / 118° 42.0948′
Distance is 224.6m
NOTE:
after connecting the X-Pilot to the boat, please refer the
[Wiring Test]
in
charpter 3.1 and confirm the wiring before start autopilot model
.
