8
(2) Install the "TV fix bracket" to the TV set body
●
The combination of the attachments corresponding to the installation conditions of 46/55WL700E/T use the fixed strews
from the table for fixing.
M8
M6
M4
M8
M6
M4
M8
M6
M4
M8
M6
M4
M8
M6
M8
M6
M4
TV fix bracket
Fixed screws
M6 Screw Hole
M4 Screw Hole
M6 Screw Hole
M6 Screw Hole
M6 Screw Hole
M6 Screw Hole
M8 Screw Hole
M4 Screw Hole
M8 Screw Hole
M4 Screw Hole
M8 Screw Hole
M4 Screw Hole
M8 Screw Hole
M4 Screw Hole
M8 Screw Hole
M8 Screw Hole
*46WL700E/T
*55WL700E/T
3
Connections for the TV
Not for use
A
Cable clips
B
Prohibited areas of connection
(about 80mm
2
)
●
Please refer to operating construction of TV host concerning the connection of antenna and external equipments.
●
Install the "cable clips" provided with the TV set to Section
A
and
B
. Please group the connections based on the terminates'
location, connection type and quantity.
●
During the connecting process, please do not let any wire hanging on the "prohibited areas of connection" (an area of 80mm
2
located under TV set side steel mounting bracket)
The contact between "prohibited areas of connection" and "Wall bracket" or "TV fix bracket" caused by hanging may lead to
damage of the connection or installation failure of the TV.
Assembling and Installation(2)
(when installing the speaker to the host of the TV monitor)
(1) Preparation of the dedicated speaker for the LCD monitor host
Take the LCD monitor host and the dedicated speaker out of the case.
※
Please follow the methods and steps printed at the product package carefully when taking them out.
●
Please put a soft blanket on a flat place and put the LCD color TV with screen side facing down.
(2)
Installation of the dedicated speaker
The dedicated speaker shall be installed in the first place.
Take the speaker and other parts out of the case.
●
Be careful when operating the speakers. The collision with the display or others may result in breakage, deformation or damage.
●
Please also refer to the TV host operation manual (Chapter of Preparation) "Installing the speaker".
●
1
Install the speaker at the back of the monitor
●
Attach the left and right hanger to the hole at the back of the monitor.
Speaker
C100047_WAL14C_EN.indd 8
2010/12/15 13:34:06