Toshiba W-412, Service Manual

Page: 35 / 69

Disassembly and Reassembly
Toshiba
4-17
4-3-23 Plate Ground Deck, Cylinder Ass’y Removal
1) Remove the 3 Screws Π.
2) Lift the Plate Ground Deck ´ .
3) Lift the Cylinder Ass’y
ˇ
.
Assembly :
1) Match the 3 holes in the bottom of Cylinder ass'y
ˇ to the 3 holes of Main Base as attending not to
drop or knock the Cylinder ass'y ˇ .
2) Tighten the 1 Screw
Œ
.
3) Match the Plate Ground Deck ´ to the Hole of
Base Main.
4) Tighten the other 2 Screws Π.
Note :
1) Take care not to touch the Cylinder Ass'y ˇ and
the tape guide post at reinstalling.
2) When reinstalling, Don't push down too much on
Screw Driver.
Œ
3 SCREWS
´
PLATE GROUND DECK
ˇ
CYLINDER ASS'Y
Fig. 4-32 Plate Ground Deck, Cylinder Ass’y Removal
4-3-24 Belt Pulley Removal
1) Remove the Belt Pulley Π.
Note : Take extreme care not to get grease on Belt
Pulley Πat assembling or reassembling.
Œ
BELT PULLEY
Fig. 4-33 Belt Pulley Removal
4-3-25 Level Head Cleaner Ass’y Removal
(Optional)
1) Release the Hook Π.
2) Lift the Lever Head Cleaner Ass’y ´ .
Œ
HOOK
´
LEVER HEAD CLEANER ASS'Y
SLEEVE-HEAD CLEANER
Fig. 4-34 Level Head Cleaner Ass’y Removal