Toshiba W-412, Service Manual

Page: 27 / 69

Disassembly and Reassembly
Toshiba
4-9
4-3-7 Bracket Gear, Gear Joint 2, 1 Removal
1) Remove the Screw Π.
2) Remove the Bracket Gear ´ .
3) Remove the Gear Joint 2
ˇ
.
4) Remove the Gear Joint 1 ¨ .
Assembly :
1) Be sure to align dot mark of Gear Joint 1 Πwith
dot mark of Gear Joint 2 ´ as shown Fig 4-15.
(Refer to Timing point1)
2) Confirm the Timing Point 2 of the Gear Joint 2 ´
and Slider Cam ˇ .
Œ
SCREW
´
BRAKET GEAR
¨
GEAR JOINT 1
ˇ
GEAR JOINT 2
4-3-8 Gear Loading Drive, Slider Cam,
Lever Load S, T Ass’y Removal
1) Remove the Belt Pulley. (Refer to Fig. 4-33)
2) Remove the Gear Loading Drive
Πafter releasing
Hook [A] in the direction arrow as shown in detail
drawing.
3) Remove the Slider Cam ´ .
4) Remove the Lever Load ˇ , Link Load ˆ & Lever
Load ¨ , Link Load Ø .
Œ
GEAR LOADING DRIVE
ˆ
LINK LOAD S
ˇ
LEVER LOAD S
¨
LEVER LOAD T
Ø
LINK LOAD T
´
SLIDE CAM
HOOK(A)
Fig. 4-14 Bracket Gear, Gear Joint 1,2 Removal
Œ
GEAR JOINT1
´
GEAR JOINT2
ˇ
SLIDER CAM
TIMING POINT 1
TIMING POINT 2
Fig. 4-15 Gear Joint 1,2 Assembly
Fig. 4-16 Gear Loading Drive, Slider Cam,
Lever T, S Load Ass’y Removal