27
00 : 00 : 05 SP
11 : 30 SAT
HI-FI
STEREO
TV/VCR
1
Press TV/VCR to select
TV/VCR mode.
Press MENU. Select TV
SETUP mode using
or
,
then press ENTER.
2
Press
or
to select
NICAM. Then press
to
select the AUTO position.
Press MENU repeatedly to re-
turn to normal TV screen.
NICAM STEREO broadcast
“NICAM ST” illuminates when
a NICAM STEREO broadcast
signal is received.
NICAM OFF
It will be displayed for the
NICAM signal when the
“NICAM OFF” is selected in
menu screen.
PLAYBACK
Selection of audio channels - audio channel is selected with AUDIO
according to the chart below.
Hi-Fi signal indication
Press DISPLAY.
It will be displayed for approx. 4 sec-
onds when playing Hi-Fi video cas-
sette tapes.
NICAM STEREO RECORDING AND PLAYBACK
RECORDING
This unit is capable of recording sound in Hi-Fi system. NICAM
STEREO broadcasts are recorded in its original sound system
regardless of the setting. If you wish to record NICAM
programmes, select NICAM “AUTO” as follows.
It is only advisable to switch off NICAM if you are experiencing
noise interference (popping) associated with poor NICAM
reception.
NOTES:
• When you play a tape recorded in mono, the
sound is always played back in mono regard-
less of the AUDIO select setting.
• If the sound is distorted when playing back
the tape recorded by other Hi-Fi VTR, adjust
with TRK+ or – .
NICAM OFF
NICAM ST
VIDEO Plus+/PROG.
Mono
Right channel
signal output
from both
loudspeakers.
Left channel
signal output
from both
loudspeakers.
Stereo signal
output from
both loud-
speakers.
On-screen indica-
tions (for 4 sec.)
NICAM Stereo
programme
On-screen indica-
tions (for 4 sec.)
NICAM Stereo
programme
STEREO
HI-FI
R CH
HI-FI
L CH
HI-FI
MONO
5N50301A [E] P25-32
1/7/05, 4:51 PM
27
