Mobile Communications Division
Customer Services
Version 1.0 14/08/2006
Created by Konrad Szombara
Page 101 of 103
The following pictures are for equipment that MUST NOT be used for ACF
replacement and as such would invalidate any such warranty with Toshiba:
This is not acceptable as it is open to human error along with the fact that it
is non ESD compliant and susceptible to dust.
Removing an ACF components requires some instruction, although a simple
Spot Heater is sufficient for this. Consider the process for ACF removal and
preparation.
Step 1 – Dismount ACF by spot heater at a temperature of 130-140
degrees.
