![background image](http://html.mh-extra.com/html/toshiba/trst-a10-series/trst-a10-series_user-manual_429122034.webp)
TRST-A10/TRST-A15 POS Printer OPOS Control Application User’s Manual
TOSHIBA TEC CORPORATION EAA-02450
34
Common Registries for Single Side Printers / Dual Side Printers
Service
Filename of Service Object
Description
Brief explanation of Service Object
Version
Version number of Service Object
DeviceName
Connected device
Port
(*1)
Name of communication port
Can be set from the Control Panel.
BaudRate
(*2)
Communication speed
Can be set from the Control Panel.
Should be consistent with the baud rate setting of the device.
VendorID
(*3)
Vendor ID of the USB device
ProductID
(*3)
Product ID of the USB device
InputInterface
(*3)
Specifies an interface to be used for inputting data from a USB device
OutputInterface
(*3)
Specifies an interface to be used for outputting data from a USB device
InputEndPoint
(*3)
Specifies an end point to be used for inputting data from a USB device
OutputEndPoint
(*3)
Specifies an end point to be used for outputting data from a USB
device
Override
For Left90/Right90 Rotation Print, specifies whether or not standard
characters are to be printed on two lines which are used for printing
double height characters.
Off:
Not printed
On:
Printed
Can be set from the Control Panel.
Country
Country code
Can be set from the Control Panel.
PaperWidthMode
Type of paper by paper width
0:
80 mm
1:
58 mm
Can be set from the Control Panel.
Should be consistent with the paper width setting of the device.
BitmapAspect
Bitmap aspect ratio setting
0:
Not supproted
1:
Fixed
PrintBarCodeMode
Specifies the print mode for bar code printing.
When “TEC” is specified, the print width of bar code is determined
based on the ratio of width specified by the Width parameter to the
paper width.
When “Standard” is selected, the print width of bar code is determined
by comparing the print width speficied by the Width parameter to the
width of bar code to be printed.
(For details, refer to the section “Limitations and Precautions” in this
chapter.)
WatchEndedThreadTimeout
Timeout for forced thread termination
UnKownRetryCount
(*3)
Specifies whether or not a retry process is to be performed when a
connection with the device fails due to Unknow. When this item is not
contained in the registry list, no values are given, or something other
than a numeric value is specified, zero (0) is selected as a default.
0: Retry process is not executed for Unknown (Default)
Other than 0: Retry process is executed for UnKnown
UnKownRetryTimeout
(*3)
Effective only when a value other than zero (0) is set for