![background image](http://html.mh-extra.com/html/toshiba/trst-a10-series/trst-a10-series_user-manual_429122017.webp)
TRST-A10/TRST-A15 POS Printer OPOS Control Application User’s Manual
TOSHIBA TEC CORPORATION EAA-02450
17
Escape sequence operable only when specified
Name
Data
Description
Paper cut
ESC|#P
Operable
The character “#” signifies the percentage cut desired.
0
: No cut
1-100 : Partial cut
Feed and Paper cut
ESC|#fP
Operable
The character “#” signifies the percentage cut.
0
: No cut
1-100 : Partial cut
Paper is fed by the RecLinesToPaperCut lines.
Feed & Paper cut &
Stamp print
ESC|#sP Not operable
Only Feed and Paper cut are executed and Stamp Print is
ignored.
Bitmap print
ESC|#B
Operable
The character “#” signifies the bitmap number specifed by the
SetBitmap method. Bit numbers “1” to “10” can be specified.
These bitmaps (bitmap numbers 1 to 10) are saved using the
SetBitmap method.
1–3 : A bitmap is saved in the RAM.
4-10 : A bitmap is saved in the flash ROM.
The extended function of DirectIO is used to save a bitmap in the
flash ROM.
Top logo print
ESC|tL
Operable
Bottom logo print
ESC|bL
Operable
Stamp print
ESC|sL
Not operable
Ignored
Multiple line feed
ESC|#lF
Operable
The character “#” signifies the number of lines to be fed.
Unit feed
ESC|#uF Operable
The character “#” signifies the number of lines to be fed by
MapMode units.
Reverse feed
ESC|#rF
Not operable
Ignored
Embedded data
transmission
ESC|#E
Not operable
Ignored
Escape sequence operable during printing
Name
Data
Description
Font type selection
ESC|#fT
Operable
The character “#” signifies a value that specifies a font type.
1: Font A
2: Font B