7/12
Copyright© 2015 TOSHIBA Corporation – Semiconductor & Storage Products Company
11.
Main Specifications
[Operating Ambience
］
Temperature: -25
～
85
℃
(-13
～
185 ), Humidity:95%RH
[Size] 32.0
（
L
）
×24.0
（
W
）
×2.1mm
（
T
）
[Weight] Approx.2g
[Interface] SDHC Memory Card Standard
[Input Voltage] 2.7
～
3.6V(Max)
[Content of the Package] SDHC memory Card with embedded TransferJetTM functionality
(1 pc), Card case (1 pc), User manual (with warranty) (1 pc)
[TransferJet
TM
functions] File transfer (OBEX
TM
transmission) function (update transfer and selective transfer), iSDIO
standard compliant (Go to the following web site for detailed information).
12.
Safety Information and Rules and Regulations
Federal Communications Commission (FCC) Notice
(USA)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment and the receiver.
●
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
●
Consult the dealer or an experienced radio or television technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
To comply with the FCC RF exposure compliance requirements, this device and its antenna
must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including interference that may cause undesired operation.
Canadian Notice
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to
The following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
This device complies with the Canadian ICES-003 Class B specifications and RSS-220 of Industry Canada.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations. Wireless operation is subject to 2 conditions. The first is that the wireless device may not
cause interference. The second is that the wireless device must accept any interference, including
interference that may cause undesired operation of the device.
To comply with the Canadian RF exposure compliance requirements, this device and its antenna
must not be co-located or operating in conjunction with any other antenna or transmitter.
Avis Canadien
