Toshiba TLP-560, Quick Start Reference Sheet

Page: 3 / 5

SmartPanel Projector Driver Application Note Toshiba TLP-560
© 2002 SP Controls Inc. 601 Minnesota Suite 115 San Francisco, CA 94107 help@spcontrols.com
D. Relays
The following table specifies the factory preset
settings for the low-current relays found on the rear
of the
SmartPanel. The Configuration Utility can
be used to customize these settings your installation.
Relay 1 ON Maintained
Relay 2 ON Momentary
Relay 3 OFF Momentary
Selection Momentary; not Binary
E. Other Presets
The following table specifies other default factory settings for this Driver that affect is control of the
Projector.
Power Status Feedback Method None (see note 1)
Control Wiring Option IR Emitter
Control for the Toshiba with this Driver is via RS-232 and IR Emitter. The projector does not have a wired
remote port. Power polling is not available for this projector.
The following table specifies settings for the Panel’s configurable timers. For more information on the
inactivity shutdown feature and the lockout timer see the
SmartPanel Configuration and Installation
Guide.
Lockout Timer 74 seconds (see note 3)
Inactivity Shutdown Disabled
RELAYS
PWR
ON
MAINT.
PWR
ON
MOM.
PWR
OFF
MOM.
1A 1B 3A 3B 2A 2B 4A 4B 6A 6B 5A 5B 7A 7B
SELECTION
(EXT. SWITCHER CTRL)
4 3 2 1
500mA MAX. CURRENT