Quick Start Reference Sheet
Toshiba TLP-560
Revision A
DR-TSH3 – 10/8/02
SP Controls reserves the right to modify specifications without notice at any time.
NOTE: This document is intended
only as a quick reference for installation
– please read the following
SP Controls Application Note for a complete description of this projector driver prior to installation.
I. Driver Features
1. Input Selection Mapping
Selection 1:
COMPUTER
Selection 2:
VIDEO
Selection 3:
S-VIDEO
Selection 4:
VIDEO
2. Hidden Function Mapping
Selection 1:
ADJ -
Selection 2:
ADJ +
Selection 3:
ADJUST LEFT
Selection 4:
ADJUST RIGHT
Off:
MENU / SELECT
Volume Up:
ADJUST UP
Volume Down:
ADJUST DOWN
3. Other Driver Features
Power Status Feedback Method
None (RS-232 Power Polling Unavailable)
Control Wiring Option
IR Emitter
II. Wiring Specifications
NOTE: For a wiring diagram, please see the following Application Note
1. RS-232:
Wire the Panel RS-232 port to a male DB9 as follows:
RX to
2
TX to
3
GND to
5
Connect this male DB9 to the Toshiba adapter cable and connect to projector port labeled CONTROL
2. Infrared Emitter:
Wire the Panel IR/Serial port to a female 1/8" Mini as follows:
IR/SER
to
tip
GND
to
ring
Direct wiring to the IR Emitter is not recommended as it makes removal of the Panel for service more
difficult.
Attach to any projector IR port using the Panel’s IR Emitter (included with the Panel).
Note that the emitter glows red when IR is emitted so wiring can be verified.
