34
CONTROLS AND FEATURES
En
glis
h
Setting up the Network
You can select the Network Type.
a
Press
MENU
/
C
c
to highlight
PREFERENCES
icon.
b
Press
B
or
b
to select
Network Setup
and press
OK
.
c
Press
B
or
b
to select
Network Type
and press
C
or
c
to select
Wired
or
Wireless
.
NOTE:
If the Dual Band WLAN Adaptor is not
connected, Wireless cannot be selected.
d
If you selected
Wired
, see “Advanced Network Setup”
on page 36.
NOTE:
• This feature is grayed out when the Dual Band WLAN
Adaptor is not connected or Network Type is set to Wired.
• When you insert or remove the wireless LAN adaptor, you
must turn off your TV and unplug the power cord, and then
plug and turn on again.
• Continued connection of
AP
(Access Point) is not
guaranteed. The connection may be disconnected while
watching TV.
• Do not remove the Dual Band WLAN Adaptor when
Network Type
is set to
Wireless
or wireless
communication is active.
There are 2 methods for Wireless Setup:
Assisted setup by using the Wi-Fi Routers notification
information.
Network name, Authentication and Encryption are decided
based on information sent from the Wi-Fi router. Security key
to be set manually.
Manual setup
Network name, Authentication, Encryption and Security Key
all to be inputted manually.
Assisted Setup
a
In the
PREFERENCES
menu, press
B
or
b
to select
Network Setup
and press
OK
.
b
Press
B
or
b
to select
Wireless Setup
and press
OK
.
c
Press
B
or
b
to select
Assisted Setup
and press
OK
.
d
Press
B
or
b
to select the desired AP and press
OK
.
NOTE:
Check the MAC address on the label of the AP
or in the manual, and select your AP.
e
Highlight
Security Key
and press
OK
. The Software
Keyboard window will appear.
f
Input the Security Key by using the Software
Keyboard (see page 38). To save your setting, press
the
BLUE
button.
NOTE:
• The Security Key must adhere to these conditions:
- TKIP/AES: 8-63 ASCII or 64 Hex characters
- WEP: 5 or 13 ASCII or 10 or 26 Hex characters
• There is only one key ID to set for WEP encryption.
g
Highlight
Done
and press
OK
.
NOTE:
If
Network Name
is not displayed, see step 4
and 5 in
Manual Setup
below to set
Network Name
before pressing
Done
.
NOTE:
Settings are not saved if
BACK
is pressed before
Done
is selected.
Manual Setup
a
In the
PREFERENCES
menu, press
B
or
b
to select
Network Setup
and press
OK
.
b
Press
B
or
b
to select
Wireless Setup
and press
OK
.
c
Press
B
or
b
to select
Manual Setup
and press
OK
.
d
Press
B
or
b
to select
Network Name
and press
OK
.
The Software Keyboard window will appear.
e
Input the Network Name by using the Software
Keyboard (see page 38). To save your setting, press
the
BLUE
button.
Wireless Setup
Network Setup
Energy Saving Settings
Off
Auto
Teletext
Display Settings
Network Lock
Panel Lock
Off
AV Connection
3D Setup
PREFERENCES
Network Type
Wired
Network Connection Test
Advanced Network Setup
Network Setup
Wireless Setup
Wireless Setup
Assisted Setup
Manual Setup
Summary of Contents for TL83* Digital Series
Page 1: ...TL83 Digital Series ...
