Toshiba TF 631 User Manual Download

Page: 9 / 120

TOSHIBA

TF 631

Preparation

How to insert the
recording paper:

Remove the paper cassette

Insert cassette index (A4).

Prepare the recording paper by flexing and
fanning out the stack to separate the sheets.

Press down the pressure plate until you hear it
lock in place.

Place the paper so that it lies straight in the
cassette with the side to be printed facedown
and don’t forget:

The paper cassette holds a maximum
250 sheets (80 g/sm).The paper is
never stacked above the limit mark.
(as shown on the left)

Then: Slide the cassette into the slot

until you hear it lock in place.

Do not use damp, wrinkled on torn
paper.

Install exit
paper trays:

Install the exit paper tray fits in the
slots on the left side of the fax.

Secure the document tray. Insert the pins of the
tray into the corresponding receptacles. Unfold
the extension if required.

Summary of Contents for TF 631

























































































































Search results

Summary of Contents for TF 631

Reviews:

Related manuals for TF 631

Brands by name

Popular brands

Toshiba TF 631, User Manual

Search results

Summary of Contents for TF 631

Reviews:

Related manuals for TF 631

Brands by name

Popular brands