Toshiba Tecra TE2300 User Manual Download Page 170

Page: 170 / 189

TE2300

Version

Last Saved on 21.05.2003 10:04

ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as

I-2

TOSHIBA TE2300

Wireless LAN

Refer to the sheet Information to the User for regulatory information that
may apply in your country/region.

R-F Frequency

■

Band 5 GHz (5150-5850 MHz) (Revision A,
Turbo Mode)

■

Band 2.4 GHz (2400-2483.5 MHz)
(Revision B)

Modulation Technique Direct Sequence Spread Spectrum

■

CCK, DQPSK, DBPSK (Revision B)

■

OFDM-BPSK, OFDM-QPSK, OFDM-
16QAM, OFDM-64QAM (Revision A,
Turbo Mode)

The range of the wireless signal is related to the transmit rate of the
wireless communication. Communications at lower transmit range may
travel larger distances.

■

The range of your wireless devices can be affected when the antennas
are placed near metal surfaces and solid high-density materials.

■

Range is also affected by “obstacles” in the signal path of the radio
signals that may either absorb or reflect the radio signal.

Supported frequency sub-bands

Subject to the radio regulations that apply in your country/region, your
Wireless LAN card may support a different set of 5 GHz/2.4 GHz
channels.

Consult your Authorized Wireless LAN or TOSHIBA Sales office for
information about the radio regulations that apply in your country/region.

Wireless IEEE 802.11 Channels Sets (Revision B)

Frequency Range Channel ID

2400-2472 MHz

2412

2417

2422

2427

2432

2437

2442

2447

2452

2457*

2462

* Factory-set default channels

Summary of Contents for Tecra TE2300






























































































































































































Search results

Summary of Contents for Tecra TE2300

Reviews:

Related manuals for Tecra TE2300

Brands by name

Popular brands

Toshiba Tecra TE2300, User Manual

Search results

Summary of Contents for Tecra TE2300

Reviews:

Related manuals for Tecra TE2300

Brands by name

Popular brands