Toshiba Tecra S2, User Manual

Page: 62 / 266

62
Getting Started
Hard Drive Recovery Utilities
5.375 x 8.375 ver 2.3
TECHNICAL NOTE: You must have at least one memory
module installed for the computer to work.
Checking total memory
When you add or remove a memory module, you can check
that the computer has recognized the change. To do this:
1 Click Start , then click Control Panel .
2 Click Performance and Maintenance .
3 Click System .
4 The General tab view automatically appears and shows
total memory.
If the computer does not recognize the memory
configuration, turn off the computer, remove the memory slot
cover, and make sure the memory module is seated properly,
as described in step 10 of
“Adding memory” .
Hard Drive Recovery Utilities
Your computer has been configured with a hard disk partition
to allow you to recover your hard disk drive or reinstall
selected applications and software features or utilities.
It is strongly recommended that you create recovery CDs/
DVDs before using your system. For more information on
creating Recovery media, see
“Creating Recovery CDs/DVDs”
on page 63
NOTE