manualshive.com logo in svg

Toshiba Tecra M2V, Maintenance Manual

The Toshiba Tecra M2V is a powerful laptop designed for professional use. With its sleek design and reliable performance, it is a great choice for business professionals. Our website offers free downloads of the Toshiba Tecra M2V's user manual, providing detailed specifications and instructions for users. Visit manualshive.com to download it easily.

Share
Download
background image

3.23  Running Test 

3   Tests and Diagnostics 

3.23 Running 

Test 

3.23.1 Function Description 

This function automatically executes the following tests in sequence: 

1.

 

System test (subtest 01) 

2.

 

Memory test (subtests 01, 02 and 06) 

3.

 

Real timer test (subtest 02) 

4.

 

Display test (subtest 01) 

5.

 

FDD test (subtest 02) 

6.

 

HDD test (subtests 01) 

7.

 

Printer test (subtest 03) if selected 

3.23.2 Operations 

NOTE

:  Do not forget to load a work disk in the FDD. If a work disk is not loaded, an error 

will be generated during the FDD testing. 

1.

 

Remove the diagnostics disk from the floppy disk drive and insert the work disk. 

2.

 

Select 

6

 from the Diagnostic Menu and press 

Enter

,

 the following message displays: 

Printer wrap around test (Y/N) ? 

Selecting 

Y (yes)

 executes the printer wraparound test. A printer wraparound connector 

must be connected to the parallel port of the computer to properly execute this test. 

3.

 

Select 

Y 

or 

N

 and press 

Enter

. The following message will appear: 

Serial#A wrap around test (Y/N) ? 

Selecting 

Y (yes)

 executes the ASYNC wraparound test. An RS-232-C wraparound 

connector must be connected to the serial port of the computer to properly execute this 
test.  

4.

 

Select 

No 

and press 

Enter

. The following message will appear: 

Mount the work disk(s) on the drive(s), 

then press [Enter] key. 
[Warning : The contents of the disk(s), 

will be destroyed.] 

5. 

This program is executed continuously. To terminate the program, press 

Ctrl +Break

.

TECRA M2V Maintenance Manual (960-476) 

 

3-55 

Summary of Contents for Tecra M2V













































































































































































































































































































































































Reviews:

No comments

Related manuals for Tecra M2V

Compaq Presario V3500 - Notebook PC Maintenance And Service Manual preview
Presario V3500 - Notebook PC
Brand: Compaq Pages: 175
Kogan Atlas KAL14N300HA User Manual preview
Atlas KAL14N300HA
Brand: Kogan Pages: 10
Acer TravelMate P645-M User Manual preview
TravelMate P645-M
Brand: Acer Pages: 85
Acer TravelMate C210 Series User Manual preview
TravelMate C210 Series
Brand: Acer Pages: 97
Acer TravelMate P243-MG User Manual preview
TravelMate P243-MG
Brand: Acer Pages: 84
Acer TravelMate B113-M Service Manual preview
TravelMate B113-M
Brand: Acer Pages: 217
Acer TravelMate P278-M User Manual preview
TravelMate P278-M
Brand: Acer Pages: 74
Acer TravelMate C310 Series Guía Del Usuario preview
TravelMate C310 Series
Brand: Acer Pages: 69
Clevo W950JU Service Manual preview
W950JU
Brand: Clevo Pages: 96
Clevo W950BU Service Manual preview
W950BU
Brand: Clevo Pages: 100
Clevo W370ET Service Manual preview
W370ET
Brand: Clevo Pages: 108
Clevo W760K User Manual preview
W760K
Brand: Clevo Pages: 230
Gateway 7000 Series User Manual preview
7000 Series
Brand: Gateway Pages: 138
Packard Bell TE69BMP User Manual preview
TE69BMP
Brand: Packard Bell Pages: 90
AIRIS N765 User Manual preview
N765
Brand: AIRIS Pages: 104
HCL 1095 SERIES User Manual preview
1095 SERIES
Brand: HCL Pages: 30
IBM MT 2643 Hardware Manual preview
MT 2643
Brand: IBM Pages: 116
AVERATEC AV3715-ED1 User Manual preview
AV3715-ED1
Brand: AVERATEC Pages: 56

Brands by name

Popular brands

Load more brands