Toshiba TDP-TW100B, Service Manual

Page: 44 / 90

Chapter 6
6-12
No
Yes
Yes
Yes
No
No
No
Yes
No
Yes
(Hint)
*1 It can be referred to from “Start > Control Panel > Network Connections” or “Start > Settings > Control Panel > Network and Dial-up Connections”.
*2 Other applications may be controlling the same device as Wireless Utility.
*3 Check box “Use Windows to configure my wireless network settings”
Checked --> Windows Zero Config is valid. Windows and WLU configure wireless LAN settings. However windows function is stopped
under executing Easy Connect.
Not checked --> Windows Zero Config is invalid. Only WLU configures wireless LAN settings.
*4 Wireless Utility offers Easy Connect function with the help of the interface of NDIS 5.1 standard.
There are some which are not supporting the standard in the device driver for Windows 2000.
If the same device can be used on Windows XP, there may be a driver of a new version. It is recommended to use the newest driver.
START 2
When going to start Easy Connect, the message “There is no
wireless network adapter that allows…” is displayed.
Re-ware the device, confirm the switch and re-install the
driver.
Update the driver of the wireless LAN device.
*
４
Update
Ｗｉｒｅｌｅｓｓ Ｕｔｉｌｉｔｙ
.
Change the invalid device effectively.
Terminate Wireless Utility and the other configuration
utilities.
Check the item.
Terminate the other configuration utility and stop
resident program.
Is a desired device icon shown in the “Network Connections”
window
*1
of PC?
Is a device icon valid in the
“Network Connections” window of PC.
Is the item “Use Windows to configure my wireless network
settings” checked?
*
３
Can the “Wireless Network” tab be chosen in “Network
Connections >Properties”?
*
２
When selecting “Network Connections > Display wireless
networks”, is a list displayed?
There is no wireless network adapter that allows a change of settings. Easy Connect will be stopped.