Toshiba TDP-TW100B, Service Manual

Page: 28 / 90

Chapter 4
4-6
Caution ! Do not unplug while writing !
Step 1)
Prepare a USB memory.
Step 2)
Extract an update file, and copy all files in the folder to root directory on your USB memory.
e.g.) Files which are unzipped are the following:
- tw100.tab - tw100.bin
Step 3)
Turn the projector off with main power, and insert the USB memory into the USB slot.
Step 4 )
Turn Main power on while you are pressing the MENU and
RETURN button of the projector.
Projector will change the mode to "writing" and LAMP/TEMP/FAM
LEDs become orange color and TEMP LED blinks.
“Writing” will take about 7 minutes. If it is completed, the state of
projector will become standby mode.
If all LEDs become "RED", it means "Writing" was failed. You need to
try again from the beginning.
Step 5)
Turn the projector off and take USB memory out.
Step 6)
Make sure of the F/W version. You can find it on the OSD
menu of Wireless/USB input.
(Press MENU button twice, and see version in the status
display of Setting display (2) menu.)
Image – BUTTON/LED
Image – Status display(OSD)
How to update the firmware for Network unit