Toshiba Symbio Manual Download Page 7

Page: 7 / 83

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept any interference

received, including interference that may cause undesired operation

Interference

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

Bluetooth

and Wireless LAN devices operate within the same radio frequency range and may

interfere with one another. If you use Bluetooth and Wireless LAN devices simultaneously, you may

occasionally experience a less than optimal network performance or even lose your network

connection. If you should experience any such problem, immediately turn off your Bluetooth or

Wireless LAN device.

Wireless Radio

Radio Frequency Interference Requirements

This device is restricted to indoor use due to its operation in the 5.15 GHz to 5.25 GHz frequency

range. FCC requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to

reduce the potential for harmful interference to co-channel Mobile Satellite systems.

High power radars are allocated as primary users of the 5.25 GHz to 5.35 GHz and 5.65 GHz to 5.85

GHz bands. These radar stations can cause interference with and/or damage this device.

Important:

Any changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate this equipment. This device and its antenna(s)

Summary of Contents for Symbio




















































































Search results

Summary of Contents for Symbio

Reviews:

Related manuals for Symbio

Brands by name

Popular brands

Toshiba Symbio, Manual

Search results

Summary of Contents for Symbio

Reviews:

Related manuals for Symbio

Brands by name

Popular brands