Toshiba SX-2801 Owner'S Manual Download

Page: 37 / 40

TROUBLESHOOTING

When the handset is
returned to the base unit
with the volume level set at
High, a momentary squeal
or howling sound may
sometimes be heard.

The phone does not
display the Caller ID/Call
Waiting data.

Auto talk and Any-key
feature do not work.

Can not use call waiting
options.

Additional Information

PROBLEM

SOLUTION

• This is normal.

→

It may be prevented by changing the volume setting to

Medium or Low before returning the handset to the base unit.

• You have to subscribe to Caller ID/Caller ID on Call Waiting services.

→

Check with your local telephone company.

• You answerd the call before Caller ID data was received.

→

Let the phone ring twice before you answer the call.

• The call is via PBX.

→

See page 28.

• The battery is not fully charged.

→

Charge the battery.

• Auto talk feature has been set to OFF.

→

Set this feature to ON (Any-key feature automatically set to ON).

• You have to subscribe to Caller ID/Caller ID on Call Waiting services.

→

Check with your local telephone company.

• CIDCW is not set to Opt.

→

Set this feature to Opt.
See page 15.

SX-2801.qxd 3/15/1 6:03 PM Page 37

Summary of Contents for SX-2801









































Search results

Summary of Contents for SX-2801

Reviews:

Related manuals for SX-2801

Brands by name

Popular brands

Toshiba SX-2801, Owner'S Manual

Search results

Summary of Contents for SX-2801

Reviews:

Related manuals for SX-2801

Brands by name

Popular brands