Toshiba Strata CIX DP-5000 series User Manual Download Page 37

Page: 37 / 152

The Basics

Making a Call

Strata CIX DP5000-series Telephone User Guide 05/09

Making a Call

There are three ways to originate a call from the telephone:

Handset

1. To make a call, lift the handset, then dial the number.

A line may be automatically selected or choose a line manually. Dial tone is heard
through the handset. The Speaker and Microphone LEDs do

not

light.

Digits display as they are dialled. Call progress tones (Ringback Tone, Busy Tone,
etc.) are heard through the handset.

2. When connected, continue using the handset or switch to speakerphone by holding

down

and placing the handset in the cradle.

Spkr Button

1. To make a call, press

A line may be selected automatically or choose a line manually. The extension or

Line

button lights (depending on system programming). Dial tone is heard

through the speaker. The Speaker and Microphone LEDs light.

2. Dial the number.

Digits display as they are dialled. Call progress tones (Ringback Tone, Busy Tone,
etc.) are heard through the speaker.

3. When connected, continue using the speakerphone or lift the handset to continue

the conversation.

Hot Dialling

1. To make a call using Hot Dialling, start dialling the number.

The extension button, Spkr and Mic LEDs light. Digits display as they are dialled.
Call progress tones (Ringback Tone, Busy Tone, etc.) are heard through the
speaker.

2. When connected, continue using the speakerphone or lift the handset to continue

the conversation.

Summary of Contents for Strata CIX DP-5000 series

























































































































































Search results

Summary of Contents for Strata CIX DP-5000 series

Reviews:

Related manuals for Strata CIX DP-5000 series

Brands by name

Popular brands

Toshiba Strata CIX DP-5000 series, User Manual

Search results

Summary of Contents for Strata CIX DP-5000 series

Reviews:

Related manuals for Strata CIX DP-5000 series

Brands by name

Popular brands