Toshiba Strata CIX DP-5000 series User Manual Download Page 29

Page: 29 / 152

The Basics

Customising Your Telephone

Strata CIX DP5000-series Telephone User Guide 05/09

LCD Contrast

Available on backlit telephones and backlit add-on module.

To adjust the LCD contrast on the backlit telephones

1. Press and hold down the

button.

2. Press and release

Vol

repeatedly.

Note

Holding the Vol button does not continue to change the setting. The button must
be pressed for each step of contrast change.

To adjust the LCD contrast on the Add-on Module

1. Press

(simultaneously).

2. Press

button to increase contrast.

3. Press

Contrast -

button to decrease contrast.

4. Lift the handset off-hook / on-hook to save settings.

Note

Holding the softkey does not continue to change the setting. The softkey must
be pressed for each step of contrast change

Brightness Control

Available on backlit telephones and backlit add-on module.

To change the LCD back light brightness

1. Press

(simultaneously).

2. Press

Bright

softkey to increase brightness.

3. Press

Dim

softkey to decrease brightness.

4. Lift the handset off-hook / on-hook to save the settings.

Note

Use the

Bright

and

Dim

buttons in steps 2 and 3 on the 10 button LCD Add-on

Module.

Summary of Contents for Strata CIX DP-5000 series

























































































































































Search results

Summary of Contents for Strata CIX DP-5000 series

Reviews:

Related manuals for Strata CIX DP-5000 series

Brands by name

Popular brands

Toshiba Strata CIX DP-5000 series, User Manual

Search results

Summary of Contents for Strata CIX DP-5000 series

Reviews:

Related manuals for Strata CIX DP-5000 series

Brands by name

Popular brands