Installation
Step 6: Wall Installation (Optional)
Strata CIX DKT2404-DECT User Guide 04/09
15
Step 6: Wall Installation (Optional)
Important!
You must place your DP/DKT-series telephone into 2000-mode before
connecting the cordless telephone; otherwise, the DP/DKT-series tele-
phone will not work. See “
Step 3: “Place DP/DKT-series Telephones
.
Standard Wall Plate Mounting
These telephones are designed to be mounted on a standard wall plate. To attach the
wall mount stand to the base unit:
1. Select a wall location near a 120VAC outlet and within reach of the Strata CIX
digital line connection.
2. Slide the wall mount stand into the notches at the
top of the base unit, push the wall mount stand
down and snap it into place (shown right).
3. Plug the AC adapter into the base unit.
4. Place the AC adapter cord inside the molded
channel of the wall mount stand.
5. Plug one end of the telephone cord into the LINE
jack on the base unit. Optionally, plug one end of a
Strata DP/DKT telephone into the PHONE jack.
Then place the telephone cord(s) inside the
molded channel(s) on the bottom of the wall
mount stand.
6. Plug the other end of the telephone cord into the modular wall jack.
7. Place the base unit on the posts of the wall plate and
push down until it’s firmly seated (shown right).
8. Plug the AC adapter into a standard 120VAC wall
outlet.
Note
Do not use an outlet controlled by a wall switch.
